NI-SWITCH 4.0 Win32/64Eng/Jpn NI开关产品驱动程序4.0下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-SWITCH 4.0 Win32/64Eng/Jpn NI开关产品驱动程序4.0下载

NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng/Jpn
4.0
文件大小: 1262030438 字节 (1.18 GB)
修改日期: 2010-04-25 06:36
MD5: 636df65630b98543c8ad72d6799a534a（官方正确）
SHA1: 7fb0665c14390ac8ab43e891006e3da95d756095
SHA256: 8d29919bd307275015be2a0196e25b32844cba69ddb4acdc42d34a54a7faf7b2
CRC32: 9947b7fe

百度网盘与NI官方下载地址：
Switch4.0.txt (511 Bytes, 下载次数: 0, 售价: 10 圆)

2021-7-27 22:54 上传

点击文件名下载附件

NI-SWITCH Readme File

Version 4.0

---

Thank you for using NI-SWITCH for Windows Vista/XP/2000.

This file contains important information about NI-SWITCH and is organized into the following sections:

• New Features in Version 4.0
• Supported Hardware
• System Requirements
• Installed File Names and Locations
  
  • Software
  • Documentation
  • Examples
    
• Uninstalling/Modifying NI-SWITCH
• Obsolete VIs and Functions
• Known Issues
• Changes by Release
  

New Features in Version 4.0

• Support for LabVIEW 2009 (64-bit).
• Support for NI PXI-2510 and NI PXI/PXIe-2512/2514/2515/2531 modules.
• Support for Immediate Mode FIFO: This feature improves driver execution time of Immediate Mode Operations when operating multiple relays.
• Support for 64-bit user mode.
  

Supported Hardware

NI-SWITCH 4.0 and later supports the following switch modules:

• NI PXI-2501
• NI PXI-2503
• NI PXI-2510
• NI PXI/PXIe-2512
• NI PXI/PXIe-2514
• NI PXI/PXIe-2515
• NI PXI/PXIe-2527
• NI PXI/PXIe-2529
• NI PXI-2530
• NI PXI/PXIe-2531
• NI PXI/PXIe-2532
• NI PXI-2533
• NI PXI-2534
• NI PXI-2535
• NI PXI-2536
• NI PXI-2545
• NI PXI-2546
• NI PXI-2547
• NI PXI-2548
• NI PXI-2549
• NI PXI-2554
• NI PXI-2555
• NI PXI-2556
• NI PXI-2557
• NI PXI-2558
• NI PXI-2559
• NI PXI-2564
• NI PXI-2565
• NI PXI-2566
• NI PXI-2567
• NI PXI-2568
• NI PXI/PXIe-2569
• NI PXI-2570
• NI PXI/PXIe-2575
• NI PXI-2576
• NI PXI-2584
• NI PXI-2585
• NI PXI-2586
• NI PXI-2590
• NI PXI-2591
• NI PXI/PXIe-2593
• NI PXI-2594
• NI PXI-2595
• NI PXI-2596
• NI PXI-2597
• NI PXI-2598
• NI PXI-2599
• NI SCXI-1127
• NI SCXI-1128
• NI SCXI-1129
• NI SCXI-1130
• NI SCXI-1160
• NI SCXI-1161
• NI SCXI-1163R
• NI SCXI-1166
• NI SCXI-1167
• NI SCXI-1169
• NI SCXI-1175
• NI SCXI-1190
• NI SCXI-1191
• NI SCXI-1192
• NI SCXI-1193
• NI SCXI-1194
• NI SCXI-1195
  

NOTES:  NI-SWITCH does not support legacy resource descriptors (SCXI:: and PXI::) under Windows Vista.

NI-SWITCH supports the NI USB-1359 under Windows 2000, Windows XP, and the 32-bit version of Windows Vista. NI-SWITCH does not support the NI USB-1359 under the 64-bit version of Windows Vista.

If you are using a PXI product, notice that MXI-4 is supported under Windows Vista/XP/2000, but MXI-3 is supported under only Windows XP/2000.

System Requirements

NI-SWITCH 4.0 and NI-DAQmx 9.0 support Windows Vista/XP/2000. It is recommended that you have the most recent service pack for your operating system installed. Earlier versions of NI-SWITCH/NI-DAQ support other operating systems. To find and download an earlier version of a driver that supports other operating systems, refer to ni.com/downloads.

Minimum System

• Processor—Pentium 200 MHz or equivalent
• RAM—64 MB
• A screen resolution of 800×600 with 256 colors
• Windows XP/2000, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—256 MB
• A screen resolution of 1024×768
• Windows Vista/XP/2000, with all available critical updates and service packs
  

Application Development Environments (ADEs)

• LabVIEW 8.2.1, 8.5.1, 8.6.1, 2009 (32-bit), or 2009 (64-bit)
• LabVIEW Real-Time Module 8.2.1 or later
• LabWindows™/CVI™ 7.1.1 or later
• LabWindows/CVI Real-Time Module 8.0 or later
• Microsoft Visual C++ (MSVC) 6.0 or later
• Microsoft Visual Basic 6.0
  

Installed File Names and LocationsSoftware

• National Instruments file folder location, :
  
  • Windows 2000/XP: Documents and Settings\All Users\Shared Documents\National Instruments
  • Windows Vista: Users\Public\Documents\National Instruments
    
• National Instruments file folder location, :
  
  • Windows 2000/XP/Vista 32-bit: Program Files\IVI Foundation\IVI\
  • Windows Vista 64-bit: Program Files (x86)\IVI Foundation\IVI\

    NOTES:	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: Windows 2000/XP/Vista 32-bit: Program Files\IVI\ Windows Vista 64-bit: Program Files (x86)\IVI\

    
    
• National Instruments file folder location, :
  
  • Windows Vista 64-bit: Program Files\IVI Foundation\IVI\

    NOTE:

    $(IVIROOTDIR64) is configured as an environment variable on the target system.

    
    
  
  

File Locations

Item	Installed Location on Windows XP/2000 and Windows Vista
NI-SWITCH	\Drivers\niSwitch
NI-SWITCH Function Panel	\Drivers\niSwitch\niSwitch.fp
NI-SWITCH Examples	\niSwitch\Examples
NI-SWITCH Header files	\Include
NI-SWITCH Import Library files (32-bit)	\Lib
NI-SWITCH Import Library files (64-bit)	\Lib_x64
NI-SWITCH DLL (32-bit)	\Bin

Additional File Locations for Windows Vista 64-bit

Item	Installed Location on Windows Vista 64-bit
NI-SWITCH Function Panel	\Drivers\niSwitch\niSwitch.fp
NI-SWITCH Header files	\Include
NI-SWITCH Import Library files (64-bit)	\Lib_x64
NI-SWITCH DLL (64-bit)	\Bin

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-SWITCH»Documentation. The documentation set is composed of the following documents:

• NI-SWITCH Readme File
  

• Read Me First: Safety and Electromagnetic Compatibility
  

Printed format. Includes safety instructions and information about the radio-frequency interference characteristics of the hardware it accompanies.

• NI Switches Getting Started Guide
  

Printed and PDF format. Includes hardware and software installation, MAX configuration, and signal connection information.

• NI Switches Help
  

HTML help format. Includes switching fundamentals, device specific information, programming information, tutorials, a LabVIEW VI reference, and LabWindows/CVI, C++, and Visual Basic function references.

• NI Switch Specifications
  

Printed and PDF format. Lists specifications for each NI switch module.

• NI Switch Accessory Installation Instructions (Optional)
  

Printed and PDF format. Lists NI switch module accessory installation information.

Examples

Refer to Start»All Programs»National Instrument»NI-SWITCH»Examples for the examples for the supported ADEs. The examples cover immediate operations, synchronous scanning, handshaking, and software triggering. A complete example list is available in the NI Switches Help.

Refer to the Installed File Names and Locations section for the installed locations of the example sets.

Uninstalling/Modifying NI-SWITCH

For Windows 2000/XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add/Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-SWITCH 4.x from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-SWITCH 4.x from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI-SWITCH installation, the following list of software was installed. To completely remove NI-SWITCH from your system, you must remove all of these packages also.

• NI IVI Compliance Package 4.0
• NI Measurement & Automation Explorer 4.6.1
• NI-DAQmx 9.0
• NI-VISA 4.5.1
• NI Spy 2.7
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Obsolete VIs and Functions

• niSwitch Can Connect Channels? VI
• niSwitch Connect and Wait VI/function
• niSwitch Control a Single Switch VI/function
• niSwitch Disconnect and Wait VI/function
• niSwitch Error-Query VI/function
• niSwitch Get Error Info VI/function
• niSwitch Is Debounced? VI
• niSwitch Is Scanning? VI
• niSwitch Query a Single Switch VI/function
• niSwitch Read Calibration Data VI/function
• niSwitch Scan VI/function
• niSwitch Scanning Acquisition VI/function
• niSwitch Write Calibration Data VI/function
  

NOTE:  The niSwitch Can Connect Channels?, niSwitch Is Debounced?, and niSwitch Is Scanning? VIs were replaced by identical VIs without question marks in the name.

Known Issues

The following are known issues for NI-SWITCH 4.0:

• If you click a topic link in the NI-SWITCH Function Reference Help section of the NI Switches Help, you cannot use the Back button in the HTML Help window toolbar to return to the original topic.
  

• When linking to a topic in the NI Switches Help from the context help or opening the help file from a VI within LabVIEW, the NI Switches Help launches and the relevant topic displays, but the location of the topic might not be highlighted in the table of contents.
  

• Various support files, such as .h and .lib files, are installed in \Program Files\IVI and \VXIpnp directories to support ADEs that only recognize the \VXIpnp directory.
  

• SCXI-1127 (Rev D and earlier) continuously drives the TTL1 trigger line on the SCXI backplane. This does not allow bus sharing of TTL1 with other SCXI modules. NI-SWITCH returns an error if an SCXI-1127 is in the chassis and if TTL1 is being used for scanning. If using the NI-DAQmx driver for your SCXI system, you get a resource reservation error if you try to perform a switching or signal conditioning operation that requires use of TTL1.
  

• There are known DLL collision issues with the Microsoft Visual Basic debugger and a National Instruments device driver using Traditional NI-DAQ (Legacy). A support DLL used by NI-SWITCH fails to load if Visual Basic has already loaded another DLL into the same address space. To change the default address that is used to load the driver DLL, create the following registry key:
  
  \\HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\NI-PAL\CurrentVersion\palConfig\Memory\
  sharedFixedAddress
  
  where the value is a DWORD (0x44000000 generally works). For the change to take effect, you must close and restart all applications after adding the registry key.
  

• NI-DMM 2.2
  
  • NI-DMM 2.2 updated the niSwitch DMM Switch Handshaking example for LabVIEW. If you have an earlier version of NI-DMM installed, the VI is inoperable. To use the example with NI-DMM 2.1.2 or earlier, delete the AUX Trig 1 case from the case structure connected to Sample Trigger Source in the niDMM Configure Multi Point VI.
  • NI-DMM 2.2 introduces a new enumerated value, AUX Trig 1.
    
  
  

• When you run setup.exe to install the software from the media, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.
• NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate, when using this product. These modes terminate any NI-SWITCH operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.
  

• LabWindows/CVI
  
  The links in the function panel help in LabWindows/CVI versions 7.1 and 7.1.1 will not work unless you have downloaded the most recent version of the launchhelp.js file. Instructions for downloading and installing the file can be found in the KnowledgeBase entry Why Do I Get "Object Expected" Error When Opening Links in Function Panel Help? You can locate this KB by going to ni.com/info and entering rdnkbe in the Info Code field.
  

• Reverting to NI-SWITCH 1.6 after installing NI-SWITCH 4.0
  

If reverting back to NI-SWITCH 1.6 from NI-SWITCH 4.0, you must uninstall NI-SWITCH 4.0 and reinstall NI-SWITCH 1.6.

Changes by Release4.0 from 3.8.5

• Added support for LabVIEW 2009 (64-bit).
• Added support for NI PXI-2510 and NI PXI/PXIe-2512/2514/2515/2531 modules.
• Added support for Immediate Mode FIFO: This feature improves driver execution time of Immediate Mode Operations when operating multiple relays.
• Added support for 64-bit user mode.
  

3.8.5 from 3.8

• Added support for LabVIEW 2009 (32-bit).
• Removed support for LabVIEW 7.1.1.
  

3.8 from 3.7.2

• Japanese localization for driver, LabVIEW application programming interface (API), and documentation.
• New behavior: Error and self test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) might experience a change in behavior.
  

---

Copyright

© 1998–2009 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or ni.com/patents.