Bug ID | Description |
Multisim ( 131 ) |
111005 | Grapher title/axis text does not show up correctly on Japanese operating systems. |
111194 | Some CMOS components have random outputs when they are powered up. |
111291 | Bill of Materials reports all Hierarchical Block variants when no parent variant exists. |
111336 | Undo and Redo menu items are not translated in the Symbol Editor / Title Block Editor |
111465 | Merging database from older version gives assert and error about wrong password |
111506 | Opening a Multisim project file as read-only does not work as expected. |
111534 | Line driver SN75173 does not work correctly. |
111557 | Visibility tab settings never saved. |
111612 | Netlist import does not import sources correctly. |
111614 | Convergence Assistant doesn't use LabVIEW or ELVIS instruments |
111649 | Multisim does not work correctly if the corporate/user database exists on a network and the network access is not available. |
111732 | Node does not change to digital type if all analog components disconnected and only digital components are connected. |
111766 | Component color not saved correctly. |
111786 | CD4538 doesn't work as expected. |
111837 | Enabled status of ELVIS 2 instruments in hierarchical block file are not set correctly when first loaded. |
111839 | Multisim instruments in ELVIS 1 schematic do not work when simulating in hierarchical block |
111874 | Missing functionality in Component Properties window |
111883 | Adding a new section to multi-section component does not keep pin/gate swap consistent for the other sections. |
111885 | Default pin/gate swap should be enabled for components that have this information setup. |
111954 | Saving and Save As are confusing when hierarchical blocks are used |
112094 | DC Sweep analysis incorrectly allows using 0 as an increment step. |
112115 | The dip switch initial condition doesn't behave correctly. |
112225 | The value of current sources is shown as voltage in Sweeping analyses. |
112233 | Paths with spaces are not accepted for certain XSpice commands |
112265 | Variable list missing items after you click Change Filter. |
112268 | Worst Case is not saving new tolerances added. |
112347 | Components still showing up as non-virtual even though it has no footprint. |
112376 | Printing an instrument over a wireless network takes a long time in some cases |
112474 | Measurement probe displays a 5V value in an unconnected wire |
112563 | Word generator properties window resizes itself when changing display format |
112599 | Rated LEDs have unrealistic parameters. |
112622 | Spare Gates Report updates incorrectly after backannotating from Ultiboard after using advanced gate swap. |
112632 | Multisim crashes when opening files saved with Multisim Textbook Edition (.mst) |
112648 | 4018 does not behave like a Johnson Counter. |
112713 | Models for Voltage Controlled Capacitor and Voltage Controlled Inductor do not behave as expected. |
112733 | Resistance value on the DMM doesn't seem to reset in some cases. |
112777 | Multisim crashes when trying to change values of lumped elements in Match Net. Designer |
112796 | XSPICE interface cannot handle "listing" command for large files |
112836 | Footprint Pins and Symbol Pins columns disappear when switching windows. |
112839 | DC Operating point algorithm routine cannot be paused by the user once it starts. |
112859 | In the ELVIS scope instrument, changing the timebase setting from lowest value to another value does not work correctly. |
112876 | Inductor Device power parameter is incorrectly calculated for AC analysis |
112929 | Electrolytic Cap symbol pin ordering causing footprint mapping issues. |
112936 | Logic Converter auto-circuit generation does not handle placement of the auto-generated components correctly. |
112947 | Multisim crashes after backannotating a Renumber Parts task. |
112969 | Multisim crashes when deleting the only open page of a multi-page design. |
112972 | Pre-processor allows expression using parameters whose device no longer exist |
112980 | Post/pre processor grpdelay() function returns incorrect results. |
112981 | Description box does not save the wrap setting. |
112995 | Variable capacitor doesn't change on the fly |
113049 | Ready pin on Word Generator no longer work correctly in some cases. |
113102 | Bipolar voltage source does not show useful information on the schematic |
113137 | Adding layers in MS does not preserve layer settings |
113138 | SPICE subcircuit params are being counted as pins in the pin to model mapping table. |
113167 | Component editor is incorrectly displaying pin parameters in some cases. |
113192 | Piecewise linear voltage source rounding off time values in some cases. |
113198 | NC_CONTACT and NO_CONTACT have wrong DIN symbol |
113220 | Using the hat symbol ^ to place a negation bar on pin names makes the pins disappear in some cases. |
113258 | Entire wire disappears when rewiring endpoint of existing wire and clicking anywhere on the wire as the final endpoint. |
113284 | Multiplicity Parameter 'M' is not supported by BSIM. |
113297 | PGA17X17 package has incorrect pin list |
113343 | The Temperature parameter in the resistor property pages does not validate out-of-range values correctly in some cases. |
113379 | Parameter sweep is failing in DC OP in some cases. |
113393 | Multisim incorrectly reports current source device parameters. |
113408 | Parameter sweep is limited to 50 values. |
113502 | Agilent oscilloscope does not perform auto-scale correctly |
113503 | Agilent oscilloscope has wrong averaging function |
113504 | Agilent function generator handles user input for offset voltage poorly. |
113505 | Agilent oscilloscope truncates measurements on single run. |
113509 | Agilent oscilloscope vertical zoom can go up to 1nV/div |
113514 | Simulated instruments should have jog dials respond differently to keystrokes. |
113515 | Multisim oscilloscope cannot handle large vertical offsets. |
113542 | Colour of grapher background reverts to black when copying and pasting a graph. |
113560 | TLV2372IDGK has incorrect footprint mapping |
113566 | Net routing layers in Multisim "all on" and "unset" are the same thing |
113583 | Multisim changes refdes' when saving files with components with 8 or more pins in the GROUND section |
113743 | Project view should not allow adding a file that does not exist |
113760 | 74*109* digital components have incorrect component to package mappings |
113769 | Entering the quit command in XSPICE Command Line Interface crashes Multisim |
113934 | BC817-16 footprint mapping is incorrect. |
114075 | Connector and bus names do not display all unicode characters |
114125 | ADC does not work as expected. |
114241 | Footprint mappings for J201 and J202 are incorrect |
114282 | Component context/pop up menu cannot be triggered by keyboard |
114349 | Multisim crashes when the added expression in analysis is too long |
114431 | Virtual component warning doesn't always show when exporting to PCB |
114477 | Footprint mapping for ADG413BRZ is incorrect |
114586 | IV Analysis tool enforces wrong range on number of steps in simulation parameters. |
114621 | 'Show User Data Columns' settings are lost every time the Database Manager is closed. |
114725 | Unable to unset value for component spacing in some cases. |
114972 | The shortcut key Ctrl-F does not open the find dialog window in the Description box editor. |
115055 | Last selection in Add Device/Model Parameter dialog should be remembered |
115056 | Analysis dialog should not allow selecting duplicate device/model parameters. |
115143 | LabVIEW instrument Signal Analyzer is not saving Interpolation Method. |
115148 | LabVIEW Microphone doesn't save or copy its Sample Rate setting. |
115192 | Spice output function "imag()" is not correct |
115245 | Cut or copy and pasting a partial wire pastes a junction. |
115271 | LVM sources do not allow you to switch between tabs in the property pages without selecting a source file. |
115470 | Multisim and Ultiboard do not exporting to Excel correctly when using CTRL-A to select everything in the spreadsheet. |
115585 | Dragging multiple components does not shrinking the wire attach to the junction |
115670 | Closing an unsaved design will close immediately and then prompt to save. |
115706 | Unicode characters are not displayed in LabVIEW Instruments. |
115719 | Ruler bars disappear after exiting from full screen mode |
115765 | Update circuit components on ELVIS schematic will create components to be placed in breadboard view |
115802 | File Information date format is not localized |
115916 | 3D potentiometer has incorrect resistance. |
115936 | Multisim allows renaming components when the schematic is read only. |
115973 | Schematic comments can be edited even if the read-only schematic restriction is set. |
115974 | Schematic text can be edited even if the read-only schematic restriction is set. |
116089 | Deactivate Edit Footprint button for multi-section components. |
116160 | Grapher tables can't be sorted in numerical order. |
116163 | Graph cursors show up in color in print preview |
116247 | Integration method is being translated before passed to simulator. |
Ultiboard ( 78 ) |
105433 | Copper areas are being voided around a via that should be connected. |
106154 | Density bars show incorrect information in some cases. |
108065 | Hitting the delete key while renaming a part in the Database Manager is misinterpreted as attempting to delete part. |
108273 | Layer toolbar combo box does not display the layer when switching between different view types |
108290 | DRC for max vias per net is not immediately recognized as a DRC error |
108769 | A group of components cannot be repositioned using the arrow keys. |
109510 | Gerber export cannot oversize/undersize custom pads. |
110869 | Strings with unicode characters do not show up on the workspace. |
111056 | Renamed layer name does not get updated in the Favorite Layers tab. |
111108 | The Density Bars are activated after doing a print preview. |
111342 | Ultiboard not saving project views correctly in some cases. |
111344 | Shape column in Spreadsheet View allows to type any name |
111474 | Selecting a part in the Parts Position tab does not highlights the footprint in the layout. |
111873 | Gerber and NC Drill file names should follow the same format. |
111916 | Redo does not capture changing the remove islands smaller than setting |
111935 | When changing board outline dimensions, When changing board outline dimensions, clearances do not refresh upon click apply. |
111955 | Printing of vias and all circular shapes is incorrect |
111971 | Still able to select invisible copper pads after turning off Copper layer |
112148 | Ultiboard doesn't export paste mask layer correctly when reflection was selected. |
112208 | Part mask functionality does not allow entering numeric characters. |
112300 | Using Alt+O shortcut in Ultiboard RefDes editing window causes blank tab. |
112315 | Gerber Export does not export pie shape line width. |
112387 | Ultiboard hangs when opening certain DXF files. |
112439 | Change Shape command does not work correctly when selecting multiple parts. |
112465 | Trace width are different in Ultiboard Nets Spreadsheet and Net Edit dialog. |
112567 | Default file name for exporting 2D formats is incorrectly labeled 3D |
112623 | Unit of measure for hole properties dialog is always nm. |
112624 | Hole Properties Dialog arbitrarily changes fields when you type in another field. |
112631 | The connectivity report is incorrect if real-time checking is disabled |
112691 | Copying and pasting a pad into the 'Custom Pad shape edit mode' does not allow you to save the shape. |
112739 | Board extents are not correctly determined after placing a board outline from database |
112745 | Ultboard displays multiline text as one line when using Line font. |
112747 | Components created by menu item "Add Selection to Database" does not capture text properly |
112750 | Incorrect Gerber file is generated if the design contains a component that is rotated and the reflection option selected. |
112816 | Ultiboard does not remember global colour preferences. |
112832 | Ultiboard crashes when Place>>Via dialog loses and gains focus. |
112898 | 3D-Data (specified on the component level) is not being flipped when placing a component on the bottom side of the board. |
112900 | Bounding box is incorrectly computed for rotated custom pads |
112937 | Drawing arc on copper plane causes DRC error even with sufficient clearance. |
112953 | Layer Properties don't shift over properly when you add new layers. |
113014 | Ultiboard status bar not updated after object is modified. |
113133 | Spreadsheet View not advising user about deleting the part value |
113460 | When importing a Protel .pcb file, vertical pads are being imported horizontally. |
113708 | Part mask is incorrectly allowed to be empty after warning message |
113948 | Silkscreen info placed with a pad doesn't get export to gerber. |
114004 | Unable to change layer for SMD pad in the footprint editor via the property page. |
114015 | Gerber Export does not export copper Attributes |
114366 | Ultiboard does not refresh preview box if selection is made in the spreadsheet view using keyboard. |
114415 | DRC Not Indicating Overlapping Components in some cases. |
114545 | Clicking on Lock button toggles locked status in multiple selection situation. |
114582 | Locked button status does not reflect selection for Parts tab. |
114608 | Duplicate D-codes permitted when entering values through keyboard |
114618 | Circles with a wide thickness are expanded in the Gerber file. |
114875 | Removing a net from a net group will revert Max via count to 2147483647. |
115053 | Autoplacement will affect the spreadsheet part preview in some cases. |
115058 | It is possible to enter invalid clearances in the group editor. |
115060 | Group editor component spacing values are not validated. |
115100 | Aperture mapping list should be sortable. |
115174 | Dialog should check for valid values when assigning D-Codes. |
115275 | Pin layer properties are not preserved when component changes board side. |
115321 | SVG doesn't export the pad copper ring correctly - layer settings are ignored. |
115370 | Part spacing DRC error indicator can be misleading sometimes. |
115476 | Ultiboard allows for duplicate category names in its database tree. |
115671 | Bus group drc message is cryptic |
115674 | DRC errors appear inconsistently for overlapping parts |
115687 | Pin and gate swapping should not use use group settings if the part is not in a group. |
115691 | Right clicking on checkbox for visibility shows context menu for wrong layer. |
115696 | In the Ultiboard part wizard when changing any value with the spin controls, the preview doesn't update |
115698 | Autoroute does not use daisy chain settings. |
115722 | Duplicate text causes DRC errors |
115723 | All Ultiboard text is anchored to (15, 15) mm |
115737 | Dialog box title keeps counting up after placing board outline with multiple connectors |
115760 | Entering values into Pad Diameter control in Pad property page is difficult because of auto-correction |
115948 | Ultiboard crashes when opening the 3D View in some cases. |
116156 | PCB Matrix land patterns that do not have RefDes' specified crash Multisim. |
116159 | Database manager no longer groups items alphabetically. |
116192 | Multi-select edit is not setting properties as expected. |
116203 | Entering a new via pad diameter does not accept the new value if only OK is clicked. |